voidtools forum

Which file is that, g++.exe ?

Feature Request: Automatic Fit of Column Width

paste_multiline_type -> Stem

This has been working out nicely, thanks

.

Explain?

Better to use the Everything Service (Tools | Options | General -> Everything Service) [rather then running Everything "as Admin"].

I do similar on updates (though manually; everything.exe -uninstall-service...) & can't say I remember running into said issue. Perhaps... if the .db is (really) large, it could still be in the process of writing to disk ? so even though the GUI is gone... but you would think that during that ti...

file-id: frn:

(Somewhat) interesting tidbit on file-id: frn:
Beware of DrivePool corruption / file deletion / performance degradation scenarios Windows 10/11.

Oh that's weird. regex:binarycontent:^\x00+ Is there some sort of limit with that? Or bug? With smaller files (9 bytes or 32,768 or 58,353,664), that does find files that start with any number of nul. But with a larger file, it fails? (In this case "larger" is only 692,897,792 bytes) Oh, i...

To find files that start with one or more NULL characters: regex:binarycontent:^\x00+ -or- startwith:hex:content:00 Is that correct? [YES - see below ] Is binarycontent: looking for files that contain ONLY nul? Is startwith: looking for files where the first byte is a nul? I have a ubcd.iso. The fi...

If you make a change to some other setting, is that change preserved after an Everything restart? Do a search for Everything.ini. Do you have more then one (in different locations)? If so, is one being updated & the other (possibly) not? It might have something to do with where you are storing y...

I were to manually delete these files, to Everything this tester instance does not exist? An Instance is only a "logical" concept, if you will. An Instance (by default) names its set of "data" files; *.ini, *.db... with the specified Instance name. So if the Instance is not runn...

In 1.5, all Instances use a single Service. (Times past, that was different.) In 1.4, don't know? Though if you're running multiple 1.4 instances & only one Service is running, then I'd say it is (now) the same as with 1.5. everything -instance test1 everything -instance test2 everything -instan...

11400010 20e01104 M 00efe290 N 00efe180 OP 511 // HIGH UI PROIRITY found 13470 folders with 1 threads in 0.001691 seconds found 509543 files with 8 threads in 0.014005 seconds SET SORT 0 set sort 0 ascending 1 is valid 1 case 0 already sorted finished sort, time taken 0.000789 seconds total size 17...

disconnected from service Everything: 1.5.0.1361a (x86) OS: Windows NT 10.0 19045 (x64) Admin: 0 Service: 6 (connected / partially installed) Command line: -instance NAS Binary: C:\DEV\Locate\NAS\Everything.exe Profile: C:\DEV\Locate\NAS\Everything-NAS.ini Database: C:\DEV\Locate\NAS\Everything-NAS...

Might permission settings on the NAS be playing in? On my end On HIDE, I have it set to Index Folder \\NAS, & then I also subsequently added \\NAS\LIB (& set to Monitor) HIDE does not have access to \\NAS\LIB (& various other subdirectories on \\NAS\) If I tell HIDE to rescan \\NAS\LIB, ...

I wonder if these network files have the M attribute set?

So Attribute 'M' is "OneDrive" specific?

unless Everything is opened and/or in the background

Correct.
In order for ES (command-line) to work, Everything (the GUI) itself needs to be running.

That is expected.

(Note that the Everything Service does not necessarily need to be running for ES to work, but the GUI is needed.)

efu_folder_append_path_separator Ah, that's it. in Profile NAS, efu_folder_append_path_separator=1 (true) in Profile OLD, efu_folder_append_path_separator=0 (false) The original source .efu was from Profile NAS, so it did have the closing \. I then opened that .efu (File | Open File List...) in Pro...

Load EliteBook.efu (on 214.) Export that to a new .efu, Elite-new.efu (on 214) Compare EliteBook.efu to Elite-new.efu. (Ensure the visible columns & sort order are the same between 502 & 214.) WinMerge is an Open Source differencing and merging tool for Windows. WinMerge can compare both fol...

A re-Saved .efu loses a folders closing \.

Save test1.efu
Open test1.efu
Export same to test2.efu

Code: Select all

test1.efu will show a directory name like: "c:\tmp\" (with a closing \)
test2.efu will show a directory name like: "c:\tmp"  (without a closing \)

I wouldn't exclude c: from indexing

Correct.
But as you do want to exclude the Property Indexing (of MD5) for C:, you would do that as above.

Does

t_0.8_r_0.8_AoA_0_t2_0.8_AoA2_0 ext:csv

find the file name?

Copy (from within Everything or Windows Explorer) & paste the filename, t_0.8_r_0.8_AoA_0_t2_0.8_AoA2_0.csv into the forum (as it might "show" something)?

change the shortcut for closing the active tab from Ctrl-Shift-W Oh, so that's how you do it? if there's only one tab, close the window instead Potentially unwanted (until there is a Session Management feature). > Ctrl+Shift+W Oh, so that's how you do it? Actually, I'm thinking you may have remappe...

What is a "Performance core"?

What CPU do you have?

Do other applications perform better for you on Performance cores?

I excluded c: before by "!md5 !c:"

If you want to exclude (from Index rather then display), you do that in:

Tools | Options | Indexes | Properties -> Exclude

.

lots of files

How many is lots?

I don't think quotes are of value, that it is limitation to phpBB's search feature.

Depending, you might be better off with a Google search?
site:voidtools.com/forum "end of file"

So I have 2 computers, SHOW & HIDE. SHOW has full access to NAS. HIDE has limited access to NAS. If I copy SHOW's Everything Profile to HIDE, & open that Profile on HIDE, at that point in time HIDE can see all the "hidden" file names that SHOW can see, but HIDE cannot access or ope...

You are running Everything, actually separately, on each computer?

Likewise, each computer has it's own .db that it is referencing?
As in you do not have COMPUTER_HIDDEN using the same .db found on COMPUTER_SEEN's ?

Odd, what about with the mapped network drive?

What I have to do?

DIR X:\_BE*
DIR X:\_BE* /ah

Presumably one computer should see the contents of _BE*, & the other should not.

There is no way to select "groups", except to manually choose what you want (to delete). Though... depending on your data, how it's laid out... you might be able to sort or filter results such that the particular items you're wanting to delete become more apparent. While Everything is grea...

You can use Properties, so something like:
.

: Everything - rename file based on parent folder name.png (20.18 KiB) Viewed 13290 times

Sounds like you're using Everything 1.4. IMO, you might be better served by Everything 1.5 Alpha . you can do something like dupe:name;size you can limit (filter) what you're checking for dups against, so if you only wanted to look for pictures, & pictures in c:\arewedupdyet\, then dupe:name;siz...

Well shouldn't Everything only be able to see files that the particular user (that is running Everything) has access to (in your case via the mapped drive letter - which is how Everything is seeing anything on the NAS)? Lets call your mapped drive, N:. And N: has a directory that his "hidden&qu...

What version of Everything?

Try,

wfn:abc

.

Note that path: (or lack thereof) will affect results.

" It didn't have to be closed on both sides

Ending quote mark not required

Where is says "OneDrive" that is actually something related to (MS) "onedrive.live.com" (online web storage, virtual or whatever, or some such) [& rather then simply a directory named, "OneDrive"]? If so, maybe that is playing into it? Might "username" in ...

I think Ctl+V does something a bit different when you paste?

from the web to make a search

You can use a bookmarklet (directly from within a web browser) to (on that end) automatically "filter" your selected text.

Try F2 (Rename) [for multiple files or Shift+F2 (Rename) [for a single file] ->

New Format: -> (arrow-box) -> upper/lower/tile: case

.
(At least that exists in 1.5 alpha.)

Everything will avoid gathering properties for information you do not want indexed. But shouldn't it still get it, assuming available, in any case? Some Properties I'll index & some (Property) columns I'll just add as a "lazy-load", kept out of focus, so nothing is loaded - until the ...

(Related, Remove Empty Directories.)

start Windows Explorer and execute the Undo from there Never knew such a thing existed. Now, W/E gives no clue as to what the actual action will work upon. Though with a (soft) delete, it looks like it "restores" the last deleted file. (To me, it would just make more sense to open $Recycl...

Did you follow, https://www.voidtools.com/support/everything/supported_languages/#installing_the_language_pack ? Copy the file to a location where you have read access first. For example: your desktop. Likely the issue if you're trying to do something in a "protected" place like, C:\Progra...

files are displayed in gray Might tend to indicate that the it is an "offline volume". There is option to automatically remove "offline volumes". Tools | Options | Indexes -> [FAT/NTFS/ReFS] -> Automatically remove offline volumes https://www.voidtools.com/forum/viewtopic.php?p=...

It should be reading it.

That it is not, I'll suspect it may be a permissions issue?
Does Windows Explorer display that image? Does WE show its' properties including dimensions?

If you copy that file elsewhere, say c:\tmp\, can you then see its' dimensions?

Is Everything showing a prompt to login to your NAS? No. (It has never done that & I had never even given that type of scenario any thought. Don't know that I'd even want that. Rather simply have Everything show the drive to be "offline".) Did you see Everything fail to access your NA...

it looks to be !PUNC & it also occurs in 1359 & before too now that is real weird ? (as in how did i not see this before & why did it become so obvious all of a sudden ?) it looks to be !PUNC when combined with !ext: or NOT it looks to be !PUNC when combined with !/corrupt/ it looks to b...

Different computer (& not seeing the issue). (note: same -instance name used, below, but different .exe running) 1359: disconnected from service Everything: 1.5.0.1359a (x86) OS: Windows NT 6.1 7601 (x64) Admin: 0 Service: 6 (connected / partially installed) Command line: -instance 1360 Binary: ...

"Login" loop if cannot connect. I have \\nas\OFFICE\BACK_up_BASIS set up as a Folder index, Index subfolders, Attempt to monitor changes. I'm currently logged out of NAS & I get... This is repeating... b_monitor_ntfs_process_fd_update_events_thread_proc... DB_WAIT: _db_monitor_finished...

I get 8 results on my end (with the intitle: search)?
Carole King, The Shirelles...
(google, & SeaMonkey browser)

Are you not seeing any, or expecting more?

Search found 4413 matches